IBM pSeries 620

The deskside pSeries 620 Model 6F1 Server offers some of the most advanced features in the industry:

• 1-, 2-, 4-, or 6-way, 64-bit system supports up to 32 GB SDRAM Copper-based RS64 IV SMP processors run at 600 MHz and 668 MHz and RS64 III SMP processors run at 450 MHz
• Hot-swap capable internal 9.1 GB, 18.2 GB, and 36.4 GB Ultra3 SCSI and 9.1 GB and 18.2 GB SSA disks
• 10 PCI busses provide enhanced I/O performance for the 10 64-bit PCI slots
• Two integrated SCSI controller ports (Ultra2 and Fast/Wide); one integrated 10/100 Ethernet port
• A built-in service processor with enhanced function for greater reliability and serviceability
• Hot-plug redundant power and cooling capability for enhanced reliability
• 10 hot-plug PCI slots and 17 bays (3 media/14 hard disk)

7025-6F1 Overview

The IBM pSeries 620 Model 6F1 (7025-6F1) is a 64-bit deskside follow-on to the popular 7025 Model F80. It can be configured with 1-, 2-, 4-, or 6-way, RS64 III or RS64 IV, 64-bit processors. RS64 IV processors use the same copper-based technology introduced in the high-end pSeries 680. Systems configured with the maximum of six processors run at 668 MHz, while other configurations run at 600 MHz (RS64 IV) or 450 MHz (RS64 III). The L2 cache per processor is 2 MB for an entry 1-way system, 4 MB for a 2- or 4-way system, and 8 MB for a high-end 6-way system. The Model 6F1 supports memory configurations up to 32 GB of SDRAM.

Each pSeries 620 Model 6F1 is built with a minimum of:

• One 1-way processor card
• 256 MB SDRAM
• Two Power supplies
• One 9.1 GB Ultra3 SCSI or SSA disk drive
• One 32x maximum speed CD-ROM drive
• One 1.44 MB, 3.5-inch diskette drive

The pSeries 620 simplified feature structure has no base or select feature numbers, thus allowing more flexibility when ordering your configuration. The Model 6F1 is packaged in a 10 x 17 (10 I/O hot-plug PCI slots, up to 17 disk/media bays) deskside chassis. Like most other current pSeries systems, the Model 6F1 is black. The pSeries 620 Model 6F1 server includes a modular disk subsystem that simplifies addition and replacement of drives. It has a hot-swap storage maximum capacity of 436.8 GB and a flexible I/O subsystem of ten 64-bit PCI slots, which support hot-plug adapters. The Model 6F1 is shipped with the internal adapters and devices configured and installed; software can also be preinstalled if desired.

The 7025-6F1 delivers enhanced reliability when an optional third power supply is ordered to provide redundant power and cooling. Many features, including most disk drives, PCI adapters, power supplies, and fans can be installed or removed while the system continues to operate.�