The pSeries 630 ( 7028 6C4 ) is members of the 64-bit family of symmetric
multiprocessing
(SMP) UNIX servers from IBM. The pSeries 630 ( 7028 6C4 ) is a
4 EIA1 (4U)
19-inch rack-mounted server.
With a maximum of two processor cards, the pSeries
630
( 7028 6C4 )can be configured into 1-, 2-, or 4-way systems. Each processor
card is packaged together
with up to 16 GB of memory per card into a processor book (a sealed unit that
protects the
components in a rigid structure designed for higher reliability). Total system
memory can
range from 1 GB up to 32 GB on a 4-way system based on the currently available
DIMMs.
The pSeries 630 ( 7028 6C4 ) include six hot-plug PCI-X slots and an integrated
Single Ended
SCSI controller (when equipped with POWER4+ processors), dual integrated Ultra3
SCSI
controllers, dual 10/100 Mbps integrated Ethernet controllers, and four front-accessible
disk
bays supporting hot-swappable disks. These disk bays can accommodate up to
587.2 GB of
disk storage using 146.8 GB Ultra3 SCSI disk drives. Two media bays are used
for a
CD-ROM, DVD-RAM, DVD-ROM, or another optional media device, such as a tape
or
diskette drive.
pSeries 630 ( 7028 6C4 ) Processor
- 1-, 2-, and 4-way SMP system (CUoD3 is not offered on p630 systems)
- 1- and 2-way processor books with 1.0 GHz POWER4 microprocessors with
32 MB of
L3 cache per processor card.
- 1- and 2-way processor books with 1.2 GHz or 1.45 GHz POWER4+ microprocessors
with 8 MB of L3 cache per processor card.
Processor configuration guidelines:
• The pSeries 630 supports a 2-way configuration using a single 2-way processor
card
(FC 5132, 5134, or 5127) or two 1-way processor cards (FC 5131, 5133, or
5126).
Hot-swappable disk drives inside the pSeries 630 ( 7028 6C4 )
The Models 6C4 four hot-swappable disk drive bays. Each bay
may contain
one of the following features:
- 18.2 GB Ultra3 10K RPM (FC 3157)
- 36.4 GB Ultra3 10K RPM (FC 3158)
- 36.4 GB Ultra3 15K RPM (FC 3277)
- 73.4 GB Ultra3 10K RPM (FC 3159)
- 73.4 GB Ultra3 15K RPM (FC 3278)
- 146.8 GB Ultra3 10K RPM (FC 3275)
pSeries 630 ( 7028 6C4 ) memory
1 GB to 32 GB ECC DDR SDRAM memory
• FC 4451, 1024 MB (4 x 256 MB) DIMMs, 208-pin 8 ns DDR SDRAM.
• FC 4452, 2048 MB (4 x 512 MB) DIMMs, 208-pin 8 ns DDR SDRAM.
• FC 4453, 4096 MB (4 x 1024 MB) DIMMs, 208-pin 8 ns stacked DDR SDRAM.
• FC 4454, 8192 MB (4 x 2048 MB) DIMMs, 208-pin 8 ns stacked DDR SDRAM.
Integrated ports.
- Two 10/100 Ethernet (IEEE 802.3 compliant).
- Two Ultra3 SCSI (one external Ultra3 SCSI (with VHDCI4 mini 68-pin
port), and one
internal Ultra3 SCSI disk drive backplane). VHDCI may require a mini 68-pin
connector
or FC 2118 mini 68-pin to 68-pin 0.3 meter cable as an additional feature.
- One Single Ended (SE) SCSI port on POWER4+ models.
- Three serial. Serial port 1 (S1) has two physical connectors, one RJ-48
in front and a
9-pin D-shell in the rear. The use of the front port disables the rear S1
port.
- One parallel (the parallel port is not accessible when in LPAR mode).
- Keyboard and mouse.
IBM 7028-6E4 Server
IBM 7038-6M2 Server
IBM 7025 F50 Server
