IBM 7028-6E4 Server

IBM pSeries 630 ( 7028-6E4 )

The 7028 pSeries 630 ( 7028 6E4 )is a Deskside/Desktop Server. The Model 6E4 provides the power, capacity, and expandability required for e-business computing. It offers 64-bit scalability via the 64-bit POWER4 or POWER4+ processor packaged as 1-way and 2-way cards. With its two-processor positions, the pSeries 630 can be configured into 1-, 2-or 4-way configurations. The processor cards operate at 1.0 GHz with 32 MB of L3 cache per processor card, or 1.2 and 1.45 GHz with 8 MB of L3 cache per processor. Memory DIMMs are mounted on the CPU card and can contain up to 32 GB of memory. The 7028 6E4 contains six bays. The four front-accessible, hot-swap capable bays can accommodate up to 587.2 GB of disk storage.

pSeries 630 ( 7028 6E4 ) Processor

• 1-, 2-, and 4-way SMP system (CUoD3 is not offered on p630 systems)
• 1- and 2-way processor books with 1.0 GHz POWER4 microprocessors with 32 MB of L3 cache per processor card.
• 1- and 2-way processor books with 1.2 GHz or 1.45 GHz POWER4+ microprocessors with 8 MB of L3 cache per processor card.
  Processor configuration guidelines:
  • The p630 supports a 2-way configuration using a single 2-way processor card (FC 5132, 5134, or 5127) or two 1-way processor cards (FC 5131, 5133, or 5126).

Hot-swappable disk drives inside the pSeries 630 ( 7028 6E4 )
The Models 6E4 four hot-swappable disk drive bays. Each bay may contain one of the following features:

• 18.2 GB Ultra3 10K RPM (FC 3157)
• 36.4 GB Ultra3 10K RPM (FC 3158)
• 36.4 GB Ultra3 15K RPM (FC 3277)
• 73.4 GB Ultra3 10K RPM (FC 3159)
• 73.4 GB Ultra3 15K RPM (FC 3278)
• 146.8 GB Ultra3 10K RPM (FC 3275)

pSeries 630 ( 7028 6E4 ) memory
1 GB to 32 GB ECC DDR SDRAM memory

• FC 4451, 1024 MB (4 x 256 MB) DIMMs, 208-pin 8 ns DDR SDRAM.
• FC 4452, 2048 MB (4 x 512 MB) DIMMs, 208-pin 8 ns DDR SDRAM.
• FC 4453, 4096 MB (4 x 1024 MB) DIMMs, 208-pin 8 ns stacked DDR SDRAM.
• FC 4454, 8192 MB (4 x 2048 MB) DIMMs, 208-pin 8 ns stacked DDR SDRAM.

Integrated ports.

• Two 10/100 Ethernet (IEEE 802.3 compliant).
• Two Ultra3 SCSI (one external Ultra3 SCSI (with VHDCI4 mini 68-pin port), and one
  internal Ultra3 SCSI disk drive backplane). VHDCI may require a mini 68-pin connector
  or FC 2118 mini 68-pin to 68-pin 0.3 meter cable as an additional feature.
• One Single Ended (SE) SCSI port on POWER4+ models.
• Three serial. Serial port 1 (S1) has two physical connectors, one RJ-48 in front and a 9-pin D-shell in the rear. The use of the front port disables the rear S1 port.
• One parallel (the parallel port is not accessible when in LPAR mode).
• Keyboard and mouse.