The IBM 7031-3578 300 GB 10,000 RPM Ultra320 SCSI Disk Drive
Assembly provides 300 GB of storage capacity and supports the industry standard
Ultra320 SCSI interface speed of up to 320 MBps. 8
IBM 7031-3578 Specifications:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.9 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 88 MBps
Limitation: This disk drive requires attachment to a supported Ultra320 SCSI
Adapter in a system that supports an Ultra320 SCSI cable/backplane in order
for the drive to run at 320 MBps. Also, any and all other SCSI devices on the
same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order
for this disk drive to run at 320 MBps.
- Attributes provided: 300 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7031-D24: (#3578)
- Minimum required: 1
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required: AIX V4.3 or higher PSSP levels 3.1, 3.2 and higher
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
IBM 7031-3578 Option Part Numbers
- 03N5270
- 03N5272
- 03N6337
- 80P3157
- 80P3400
IBM 73P8005 300GB 10,000rpm Hard drive
IBM 40K6808 146.8GB, 15,000rpm Hard Drive
IBM 5206 2GB FC, 73.4GB/10K Drive
