Sun Fire T1000 Server

Sun Fire T1000 Server Hardware Specifications

Processor Number
1
Sun Fire T1000 Server Architecture
1.0-GHz UltraSPARC T1 Chip Multithreaded (CMT)
1.0 GHz are 6 or 8-core
CoolThreads Server
ECO-Responsible Server

Cache memory
3 MB unified level 2 cache with ECC
16-KB primary instruction cache per core
8-KB primary data cache per core

Main Memory Capacities
DIMM slots per memory controller: 4
Total DIMM slots: 8
DIMM type: DDR2 ECC registered DIMMs
DIMM size: 512-MB, 1-GB, 2-GB, or 4-GB
Maximum capacity: 32GB (when configured with 4-GB DIMMs)
Note: DIMMS must be installed 4 at a time (with one pair on each controller). Two basic memory configurations are supported: 4-DIMMs or 8-DIMMs. All DIMMs must have identical capacity.

Standard Integrated Interfaces Network
Four 10/100/1000 Base-T Ethernet auto-negotiating ports
Remote Management (ALOM) Two SC management ports
One RJ-45 serial management port (SERIAL MGT)
One RJ-45 network management port (NET MGT)

Serial
One DB-9 (TTYA) serial port.

PCI Interfaces
One PCI-Express (PCI-E) low-profile slot
Note: This slot supports 1x, 4x, and 8x width cards.

Internal Storage Disks
One 80GB SATA disk drive, 3.5" form factor
or
One 160 GB SATA disk drive, 3.5" form factor
or
Two 73GB SAS disk drives, 2.5" form factor (firmware upgrade required).
or
Two 146 GB SAS disk drive, 2.5" form factor.