Sun Fire T2000 Server

Sun Fire T2000 Server Hardware Specifications

Processor
Number 1

Sun Fire T2000 Server Architecture
1.0/1.2/1.4-GHz UltraSPARC T1 Chip Multithreaded (CMT)
1.4 GHz is 8 core
1.2 GHz is 8 core
1.0 GHz are 4, 6 or 8-core
CoolThreads Server
ECO-Responsible Server

Cache memory
3 MB unified level 2 cache with ECC

Main Memory Capacities
DIMM slots per memory controller: 4
DIMM type: DDR2 ECC registered DIMMs
DIMM size: 512-MB, 1-GB, 2-GB, or 4-GB
Maximum capacity: 64GB (when configured with 4-GB DIMMs)
Note: DIMMS must be installed in sets of 8. Two basic memory configurations are supported: 8-DIMM or 16-DIMM. All DIMMs must have identical capacity. An 8 DIMM configuration fully populates Rank 0 slots.

Standard Integrated Interfaces Network
Four 10/100/1000 Base-T Ethernet autonegotiating ports
Network Management One dedicated 10/100Base-T Ethernet port
Remote Management SC Serial Management port and Net Management port

USB
Front:Two USB 1.1 ports
Rear:Two USB 1.1 ports

PCI Interfaces
Three PCI-Express (PCI-E) low-profile, 2.5GHz lanes card slots with up to X8 data lanes.
Two PCI-X low-profile, 64-bit, 133 MHz card slots.
Note: Earlier models of the Sun Fire T2000 (non RoHS) used one PCI-X slot (slot 0) for the SAS disk controller.

Internal Storage Disks
Up to four 73GB or 146GB HDD Disks (Hot Pluggable, SFF, SAS, 10K RPM).
Removable Media 1 slimline DVD-R/CD-RW drive