SUN FIRE V1280 servers

Sun Fire V1280 / Netra 1280 Server Hardware Specifications

Processor Number
4, 8, or 12

Sun Fire V1280 Server Architecture
UltraSPARC[tm] III Cu: 900MHz or 1200MHz
UltraSPARC IV (SF V1280 only): 1050MHz, 1200MHz or 1350MHz UltraSPARC IV+ (SF V1280 only): 1.5GHz

Cache per processor
Primary (L1): Parity protected 32 KB instruction and 64 KB data on chip (single-bit errors are corrected)
Secondary (L2): 8 MB external cache Level 3 cache per UltraSPARC IV+ processor: 32 MB shared external.

System Interconnect
9.6 GB/s Sun Fireplane interconnect.
System bus with redundant data, address and response crossbar interconnect

System Boards
Number of boards Maximum of 3 CPU/Memory boards

CPU/Memory
board Four processors each and up to 32 GB memory per board; maximum 12 processors per server

Main Memory
8 GB to 96 GB (Using 1 GB DIMMS)
Standard Interfaces
Alarm One alarm port (DB15)

Ethernet
* One ethernet/fast ethernet (10BASE-T/100BASE-T) twisted-pair port (RJ-45)
(Used for LOM/System Controller)
* Two 10/100/1000BASE-T Ethernet (copper) ports

PCI
Six open 7 in., 64 bit PCI slots:

* One 66MHz
* Five 33MHz

Serial
* One RS-232/RS-423 asynchronous/synchronous serial port (RJ45), Serial A
* Serial B is reserved.

SCSI
One Ultra3 SCSI 68-pin SCSI port

* Single-ended (40MB/sec) or
* LVD (160MB/sec)

Internal Mass Storage Disks
Two 36GB SCSI internal disks, 1.0 in., 10,000 RPM Sun Fire V1280 only:
Two 73GB SCSI internal disks, 1.0 in., 10,000 RPM

DVD-ROM
DVD-ROM internal drive

Tape
DDS-4 or DAT72 tape drive (optional)

Power Supplies
Four power supplies providing 2N hot-pluggable redundancy; only two are required for the system to run.
Environment
AC input
(Sun Fire V1280) 200-240V single phase AC, 47-63Hz, with two 11/13 Amp circuits redundant with another two on a separate grid
DC input
(Netra 1280) -48VDC or -60VDC
Input power 3300W maximum