Sun Fire V480 Server Processor
Number
Up to two dual-processor CPU/Memory Boards
(2 or 4 CPUs)
Sun Fire V480 Server Architecture
900-MHz, 1050-MHz, or 1200-MHz UltraSPARC III
Cu
Cache memory
64-KB data and 32-KB instruction Secondary: 8-MB external
Main Memory
8 memory slots (DIMMs) per processor, 16 total slots
per CPU/Memory Board 256-MB, 512-MB, or 1-GB expansion
(16GB maximum per CPU/Memory board, 32GB maximum when
configured with 4 processors) Note: Install DIMMs
in groups of four. 1050MHz & faster CPU/Memory boards
require that all memory DIMM slots be fully populated.
Sun Fire V480 Server Standard Interfaces
Ethernet Two
10/100/1000BASE-T twisted-pair ethernet ports (RJ-45)
FC-AL
One Fibre Channel Arbitrated Loop (FC-AL) high-speed
serial data connector (HSSDC)
Keyboard and mouse
USB
PCI
Six PCI slots compliant with PCI specification
Revision 2.1:
* Two slots (0 & 1) operating at 66-MHz, 64
bits wide, 3.3 volts (full length slots)
* One slot operating at 33-MHz, 64 bits wide, 5 volts
(full-length slot)
* Three slots operating at 33-MHz, 64 bits wide, 5
volts (short slot)
Remote System Controller
One RSC card plugs into a dedicated slot on the system
I/O board which includes integrated modem, serial
and Ethernet interfaces.
* One 56 Kbps modem port (RJ-11)
* One EIA-232D serial port (RJ-45)
* One 10 Mbps Ethernet port (RJ-45)
Serial
One RJ45 serial port
USB
Two standard Universal Serial Bus (USB) Type
A connectors
Disks
Two front-accessible, hot-swappable, FC-AL
disks, 36-GB, 73-GB or 146-GB, 3.5-in. x 1.0-in. 10,000
RPM
DVD-ROM 8x DVD-ROM (IDE) drive
Power Supplies
Type One required, two for N+1 redundancy (hot swap),
each with independent power cord
Output 560 W per power supply
SUN NETRA 440 servers
Sun Fire E4900 server
SUN FIRE V280R server
