SUN FIRE V490 servers

Sun Fire V490 Server: Hardware Specifications

Processor Number
Up to two dual-processor CPU/Memory Boards (2 or 4 CPUs)

Sun Fire V490 Server Architecture
1.35GHz UltraSPARC IV, 1.5GHz, or 1.8GHZ UltraSPARC IV+

Cache memory
Cache (L1): 64-KB data and 32-KB instruction per pipeline
Secondary (L2): 16 MB external (8 MB per pipeline)
Cache (L3): 32 MB external off-chip (UltraSPARC IV+ processor)

Main Memory Capacities
8 memory slots (DIMMs) per processor, 16 total slots per CPU/Memory Board 512MB, 1GB, or 2GB expansion (32GB maximum per CPU/Memory board, 64GB maximum when configured with 4 processors)
All memory DIMM slots must be fully populated.

Standard Interfaces Ethernet
Two 10/100/1000-Mbps Ethernet

Keyboard and mouse
USB

PCI
Six PCI slots compliant with PCI specification Revision 2.1:

* Two slots (slots 0 & 1) operating at 66-MHz, 64 bits wide, 3.3 volts
* Four slots operating at 33-MHz, 64 bits wide, 5 volts

Note: PCI slots 0, 1, and 2 are full length card slots (12 inch); PCI slots 3, 4, and 5 are short length card slots (7 inch).
Remote System Controller One ALOM Plus card plugs into a dedicated slot on the system I/O board

Serial
One RJ45 serial port

USB
Two (compliant with USB Revision 1.1)

Sun Fire V490 Server Internal Mass Storage Disks
Two front-accessible, hot-pluggable, FC-AL disks, 73GB or 146GB, 3.5-in. x 1.0-in. 10,000 RPM, or 146GB 15,000 RPM, maximum total capacity of 292 GB

DVD-ROM
8X Slimline DVD-ROM / 24X CD-ROM drive

Power Supplies
Type One required, two for redundancy fitted as standard, each with independent power cord
Output 1448 W per power supply