Sun Fire V890 Server Hardware Specifications
Processor Number
Up to eight
Sun Fire V890 Server Architecture
1.2GHz or 1.35GHz UltraSPARC[tm] IV, 1.5GHz, or 1.8GHz
UltraSPARC IV+
Cache memory
64-KB data and 32-KB instruction per pipeline Secondary:
16-MB external (8-MB per pipeline)
Sun Fire V890 Server Main Memory
Total of 16 DIMM memory slots available per CPU/Memory
board 512MB, 1GB, or 2GB (32GB maximum per CPU/Memory
board, 128GB maximum when configured with 8 processors)Note:
Install DIMMs in groups of four.
Ethernet
* One Gigabit ethernet (1000BASE-SX)
* One ethernet/fast ethernet (10BASE-T/100BASE-T)
twisted-pair standard connector (RJ-45)
Keyboard and mouse
USB (uses one of the two standard USB (Type A) port)
PCI
PCI slots are hot-pluggable
* Seven slots, 64 bit, operating at 33MHz (5V)
* Two slots (slots 7 and 8), 64 bit, operating at
33 or 66MHz (3.3V)
Remote System Controller
* One EIA-232D serial port (RJ-45)
* One 10 Mbps Ethernet port (RJ-45)
Serial
Two EIA-232D/EIA-423 serial ports (DB25) via splitter
cable (X985A)
USB
Two USB 1.0 ports
Internal Mass Storage Disks
Up to 12 3.5" × 1" 10000 RPM FC-AL
disks, 73GB and 146GB capacity. Maximum total capacity
of 1.75TB.
DVD-ROM
16X ATAPI DVD-ROM Drive
Tape
Optional 12GB DDS3 4mm, 20GB DDS4 4mm SCSI drive,
or 4mm DAT 72 SCSI Tape
Power Supplies
Type 2 minimum, 3 for N+1 redundancy, individual power
cords
Output 1629W maximum per power supply
SUN NETRA 440 servers
Sun Fire X4100 Server
Sun Fire E2900 Server
