SUN NETRA 240 servers

Sun Netra 240 Server Hardware Specifications

Racking

Fits into a standard 19-inch wide rack. Rack kit included 19-inch 4 post. Additional rack kits available 19-inch 2 post, 23-inch 2 post, 600mm x 600mm, and 19-inch 4 post slide adjustable up to 800 mm

Processor Number
One to two

Sun Netra 240 Server Architecture
1.28GHz or 1.503GHz UltraSPARC IIIi, 64 bit, 4-way Superscalar SPARC V9

Cache memory
64 KB data, 32KB instruction and 1 MB integrated L2

Main Memory
Capacities * 4 DIMM slots per processor, registered DDR-1 SDRAM (PC2100) 128 bit + ECC databus
* System configuration from 1GB to 8GB

Alarms
Four fail-safe, dry contact alarms (critical, major, minor and user) with external reset input via DB15 pin connector

Ethernet
* Four 10/100/1000 BaseT Ethernet
* One 10 BaseT Ethernet (Network Management)

PCI
Three internal PCI 2.2 compliant expansion slots:

* One 64 bit 33/66 MHz 3.3V full-length
* Two 64 bit 33 MHz 5V half-length

SCSI
One Ultra160 SCSI multimode (SE/LVD)

Serial
* One TIA/EIA-232-F asynchronous (DB9) Port
* One TIA/EIA-232-F (RJ45) Port (Serial Management)

System Configuration Reader and Card
Front accessible for transfer of system configuration information, including host ID, MAC address, NVRAM

USB
Two OHCI-1.0 Compliant Interfaces, supporting dual speeds of 12 and 1.5 Mbits/sec each

Internal Mass Storage Disks
Up to two hot-swap Ultra-320 SCSI 73GB or 146GB 15Krpm disks

DVD-ROM
* Optional slim-line ATAPI DVD-ROM
* Optional slim-line DVD-RW