SUN NETRA 440 servers

Sun Netra 440 Server Hardware Specifications

Processor Number
Two to four

Sun Netra 440 Server Architecture
UltraSPARC IIIi (1.28 or 1.593 GHz)

Cache memory
64 KB data, 32 KB instruction and 1 MB integrated L2

Main Memory Capacities
4 DIMM slots per processor
Registered DDR-1 SDRAM (PC2100) 128-bit plus ECC databus
System configurations from 4 GB to 32 GB

Standard/Integrated Interfaces Network
Two 10/100/1000Base-T Ethernet ports

Network Management
One 10Base-T Ethernet port

Serial
l One TIA/EIA-232-F asynchronous (DB9) Port

Serial Management
One TIA/EIA-232-F (RJ45) Port

SCSI
One Ultra320 SCSI multimode (SE/LVD)

USB
Four OHCI 1.0-Compliant Interfaces, supporting dual speeds of 12 and 1.5 Mbits/sec each
Expansion bus Six internal PCI 2.2 compliant expansion slots:

* Three full-length 64-bit 33/66 MHz 3.3V
* Three full-length 64-bit 33 MHz 5V

System Configuration Card and reader (Removable) Front accessible for transfer of system configuration information, including host ID, MAC address and NVRAM

Alarms
Four fail-safe, dry contact alarms (critical, major, minor and user)

Internal Mass Storage Disks
Up to four hot plug front-accessible Ultra320 SCSI 73GB or 146GB 15K-RPM Disks

DVD-ROM
Optional Slimline ATAPI DVD-ROM or DVD-RW

Power Supplies
Minimum of two power supplies (DC or AC) required. The below are based on two power supplies.
Maximum Input Power 1040W
Maximum Output Power (DC) 800W